Land surface deformation parameter estimation using persistent scatterer interferometry approach in an underground metal mining environment

Persistent scatterer interferometry (PSI) is a major advancement in radar interferometry for detecting and monitoring land deformation. PSI is the most advanced class of differential interferometric synthetic aperture radar (DInSAR) techniques. The technique conquers the main drawbacks of the conventional DInSAR technique by identifying radar targets having stable backscattering characteristics in time. These targets are termed as persistent scatterers (PSs). The higher the number of PSs for a study area the higher the accuracy of the results will be, which is most common for deformation analysis in urban areas. However, for non-urban or highly de-correlated areas, PSs density collapses significantly, which needs to increase for optimal results. For this purpose, partially coherent/distributed scatterers (DSs) are being exploited in addition to the PSs. The field surface of this study is one of the copper-rich mining belts in India, which consists of two major underground metal mines. Scatterer characterziation of the field surface under study suggests that most of the scatterers are DSs and very few scatterers under the influence of the mining zone are PSs. In addition to this, a preliminary investigation of deformation characteristics of the field surface under study reveals that the spatial extent of deformation is small/localized along with slow and non-linear deformation. Keeping in view scatterer and deformation characteristics of the field surface under study, in this research paper, a Quasi-Persistent Scatterer based PSI approach has been applied using high-resolution TerraSAR-X interferometric data stack (10 images) to generate deformation time series and deformation velocity. Furthermore, results obtained from the applied PSI approach and ground-based observations (using GNSS) have shown good agreement with each other, in the order of ?5.20?mm/year (LOS) and ?5.38?mm/year (subsiding), respectively.     

Modeling and surface texturing on surface roughness in machining LaPO4–Y2O3 composite

In this work, lanthanum phosphate with a 20% yttria (LaPO₄/Y₂O₃) composite prepared by an Aqueous Sol–Gel process is machined using an Abrasive Water Jet Machine (AWJM). The machinability of this composite is studied by varying the input parameters namely Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS) on Surface finish. Garnet of 80 mesh size is used as an abrasive with a flow rate of 85?g/min. The microstructural characterization study reveals the presence of new element YPO₄. This element enhances the machinability and reduced porosity in the composite. Microscopy examinations on the machined surface reveals that partial overlapping at low JP, poor surface finish at high JP and SOD, forged deficiency at maximum SOD and TS. The minimum levels of all input parameters are influenced to obtain acceptable Ra. Atomic Force Microscopy (AFM) on the kerf surface shows micro wear track and peaks. The Multiple Regression Analysis (MRA) is developed for Ra to check the adequacy. From the Analysis of Variance (ANOVA), SOD has a significant effect on Ra with a contribution of 53%. The influence of JP and TS on Ra is found to be 31% and 15%, respectively.     

极端耗水层带精准识别和调堵新技术

油田注水开发后期,部分油层存在极端耗水层带,存在耗水量大,注水驱油效率低,水循环成本高的开发问题,精准认识并有效封堵极端耗水层带,可提高注水利用率。目前国外出现了应用磁性纳米粒子的精细表征新技术及超顺磁性纳米颗粒封堵新技术,抑制极端耗水,实现低成本、高强度、深度堵调。     

Numerical Study on the Morphology of a Re-Ignited Laminar Partially Premixed Flame with a Co-Axial Pilot Flame

Re-ignited partially premixed flame(PPF)is a quite extensive flame type in real applications,which is directly relevant to the local and global extinction and re-ignition phenomenon.The authors designed a model burner to establish laminar re-ignited PPFs.Numerical simulations were carried out to reveal the morphology of laminar re-ignited PPF.Based on the distributions of temperature,heat release and radicals,the morphologies of re-ignited flames were explored.W-shaped flames were formed under pilot-lean conditions.Line-shaped and y-shaped flames were formed under pilot-rich conditions.Both w-shaped and y-shaped flames had a triple-flame structure.The re-ignited flames can stand beyond the rich flammability limit.Additionally,OH distributions indicated both pilot flame and re-ignited flame well as it rapidly increased near the flame front.OH concentration did not increase visibly while CH2O concentration mildly increased during the mild re-ignition process in the pre-zone of the re-ignited PPF.According to the results of 0-D simulations using closed homogeneous reactor,both OH and CH2O reduced ignition time significantly.The results of this work are helpful for understanding re-ignited PPF more closely.     

Morphology,thermal and mechanical performance of epoxy/polysulfone composites improved by curing with two different aromatic diamines

Epoxy/polysufone (PSF) composites cured with 4,4'-diaminodiphenyl sulfone (DDS) and 4,4'-diaminodiphenyl methane (DDM) were fabricated, and the effect of dual curing reaction of diamines with epoxy on morphology, mechanical, and thermal performance was investigated. DSC results indicated that DDM was more reactive than DDS and the activation energy decreased with the rising of DDM content. Structures with small domain size at the early stage of phase separation were fixed by the fast epoxy-DDM reaction. When the DDM content was elevated to a high level, large dual structures were changed to fine bicontinuous structures, which was favorable to improve the mechanical property. The mechanical performance of epoxy composites was enhanced and the maximum values were achieved when the DDM/DDS ratio was located at 75/25 (PSF/DDS0.25-DDM0.75). The flexural and tensile strength relative to epoxy/DDM system were enhanced more than those relative to epoxy/DDS, while the increase in toughness was the opposite. TGA measurement showed that thermal stability of epoxy/PSF composites was improved because of the restricting effect of continuous PSF domains on thermal motion of epoxy. DMA analysis exhibited two relaxation peaks for PSF/DDS0.25-DDM0.75, which could be attributed to the formation of phase separated morphology and epoxy network with different cross-link density.     

纳滤法制备高纯度雪莲果低聚果糖及其结构表征

采用纳滤分离技术以雪莲果为原料纯化低聚果糖，通过Box-Behnken中心组合设计（CCD）及响应面分析（RSM）建立预测低聚果糖纯度的二次多项数学模型，优化分离纯化工艺。结果表明：操作压力0.15 MPa，循环流量5.3 mL/min，pH值2.7时，纯化倍数为5，实际低聚果糖纯度为95.1%，达到P级产品标准。通过应用HPLC-MS、IR、¹H NMR及¹³C NMR等对雪莲果低聚果糖组分的纯度、组成、结构进行表征，结果表明：分离纯化得到的雪莲果低聚果糖由蔗果三糖、蔗果四糖和蔗果五糖组成，纯度为95.1%，平均包含5个果糖单元，主要是由β-呋喃构型的果糖组成。     

温度对化学镀锡层形貌和耐蚀性的影响

对不同温度下制备的化学镀锡层进行了电化学腐蚀试验。使用电化学工作站测试了交流阻抗谱,研究了温度对化学镀锡层形貌和耐蚀性的影响。结果表明:Nyquist图显示不同温度下所得化学镀锡层的电化学阻抗谱都呈现出简单的容抗弧特征,随着温度从40℃升高到80℃,容抗弧半径总体上先增大后减小;Bode图显示不同温度下所得化学镀锡层的相位角与频率之间的关系曲线形状相似,在测试频率范围内都只出现一个相角峰。温度为60℃时制备的化学镀锡层表面块状颗粒的尺寸和分布最均匀,容抗弧半径最大,并且在较宽频率范围内的相位角都接近70°,表现出较好的耐蚀性。     

Tribological and corrosion behaviors of fluorocarbon coating reinforced with sodium iron titanate platelets and whiskers

A series of sodium iron titanate (NFTO)–fluorocarbon composite coatings have been prepared with the liquid-phase blending method. The effects of two types of NFTO, NFTO platelets, and NFTO whiskers, on the tribological and corrosion behaviors of the composite coatings, are systematically studied. The results show that the addition of NFTO can significantly enhance the friction-reducing and wear resistance performances of the fluorocarbon coating. Under dry sliding, the minimum specific wear rate is 1.67 × 10⁻⁴ mm³/Nm for the platelet-filled composite coatings and 1.15 × 10⁻⁴ mm³/Nm for the whisker-filled composite coatings, respectively, showing a decrease of 83.5 and 88.6% than that of pure coating. Under a simulated seawater environment, the minimum specific wear rate is 5.44 × 10⁻⁵ mm³/Nm for the platelet-filled composite coatings and 0.84 × 10⁻⁵ mm³/Nm for the whisker-filled composite coatings, respectively, showing a decrease of 90.5 and 98.5% than that of pure coating. The morphologies of worn surfaces, wear debris, and transfer films are analyzed, and the corresponding wear resistance mechanisms are discussed. The electrochemical impedance spectroscopy certifies a remarkably improved corrosion resistance of the composite coatings which have been immersed in 3.5 wt % NaCl solution for 30 days. The composite coating reinforced with 7.5 wt % platelets shows the highest resistance of 256.3 × 10⁶ Ω·cm², approximately two orders of magnitude higher than that of pure coating. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48936.     

基于3D打印技术复制砂浆节理的剪切试验及峰值抗剪强度模型

为进一步研究节理三维形貌特征与节理峰值抗剪强度的关系,首先采用巴西劈裂试验获取了自然劈裂岩石表面,通过三维扫描技术获取了节理面形态的高精度点云,通过逆向建模得到了自然岩石表面的立体模型,结合3D打印技术制作出了与自然岩石表面一致的PLA模具,以3D打印获得的底模通过水泥砂浆浇筑了含有自然结构面形貌的相似节理面试样。PLA模具与复制材料差异较大,复制材料在凝结过程中不易与PLA模具黏结,进而使脱模过程较为方便,不会破坏节理面。同时PLA模具可重复进行相似材料复制工作,具有可重复使用的优点。然后进行了具有5组形貌面的20个水泥砂浆节理面在4种不同法向荷载情况下的结构面剪切试验,得到了结构面剪切位移-荷载曲线。研究了结构面峰值抗剪强度、峰值位移、剪切刚度影响因素。节理经过剪切后形貌面出现不同程度的磨损,其磨损范围与等效高差分布范围基本一致,并且在等效高差为剪断破坏模式且成片的区域磨损较为严重。在新粗糙度指标基础上提出了新的峰值抗剪强度模型,经试验对比显示出新模型的有效性。在新模型基础上提出了一个简化模型。对比发现新模型简化后其计算精度较新模型有所降低但由于所需参数减小计算较为方便,新模型简化结果精度虽然有所下降但是还是比Barton公式精度高。     

甘油预处理蔗渣的木质素分离提取及结构表征

以甘油分别对甘蔗渣进行常压甘油自催化（AGO）预处理和常压甘油碱催化（al-AGO）预处理。利用酸沉法分别从预处理液中得到自催化甘油木质素（AGOL）和碱催化甘油木质素（al-AGOL）。利用单因素实验和正交实验得到最佳木质素提取工艺为转速8000r/min、离心时间15min、甘油混合液pH为3、甘油混合液浓度10%，在该条件下木质素AGOL和al-AGOL提取率分别达到72%和76%。采用扫描电镜（SEM）、元素分析、紫外光谱（UV）、凝胶色谱（GPC）、核磁共振¹H谱、热重分析以及抗氧化活性分析等技术手段对提取得到的木质素进行结构表征。结果表明：从甘蔗渣中提取的球磨甘蔗木质素（MBL）、AGOL和al-AGOL主要呈现出球形特征；AGOL和al-AGOL具有相似的活性特点，与MBL相比，AGOL和al-AGOL的分子量更小、分布更窄、均一性更好，热稳定性和抗氧化活性更高，有望成为重要的工业原料。